All Products

Includes 1 can with 430 g.GRINDZ Grinder Cleaner to remove coffee residues inside the grinder casing and keep grounds fresh at all times. Use for r...

For Guatemala and K32 SLG shop grinders. Material: hardened special steel Diameter: 71mm Finish: glass bead blasted for optimal deburring and preve...

Shear plate for Guatemala, Guatemala 2.0 and Kenia shop grinders Old article number: 303864

Klüberpaste synthetic lubricating grease in a 50 gram tube for use with all coffee grinders. NSF H1 registered

Klüberpaste lubricating and assembly white paste in a 60 gram tube for use with all coffee grinders. NSF H1 registered Old article number: 309336

Pressure spring and bushing for the grinding chamber on the EK43, EK43 S, EKK43 and Guatemala 2.0 coffee grinders

4 piece set of feet for the K30, Guatemala 2.0 and PEAK (before serial number 602646) coffee grinders

Stainless steel measuring cup with 500 ml capacity for EK43, EK43 S, EKK43 and Guatemala coffee grinders

Bean hopper cover set in transparent for Guatemala 1.0 and Kenia K32 shop grinders

Spout small parts set for Kenia K32 and Guatemala shop grinders

Spout seal for Kenia K32 and Guatemala 1.0 shop grinders

One single bean hopper seal ring for the Guatemala shop grinders, NSF only

Micro switch for On/Off buttons (stop "0", start "I") for EK43 Allround grinders (after April 2018) and Guatemala 2.0 shop grinders

Power switch button On/Off for K30 VARIO, K30 2.0, K30 TWIN, K30 TWIN 2.0, Guatemala 2.0 and PEAK coffee grinders

Spout small parts set for Kenia K32 and Guatemala shop grinders

Pulling tool to take out the disc carrier, for burrs exchange or other maintenance, on the Guatemala shop grinders

Set of 2 bag clamping rubber buffers for the Guatemala shop grinders

Spout with bag clamping for the Guatemala and K32 shop grinders

Grind size adjustment knob for the Guatemala 2.0 shop grinder

Upper part captive pin for the Guatemala 1.0 and Kenia K32 shop grinders

Pre-breaker with 71 mm diameter for Guatemala (71mm), Guatemala 2.0 and K32 shop grinders Old article number: 300073

On and off (red and green) button replacement with 100-127 V for Guatemala, Kenia, K32 and EK43 (before April 2018) coffee grinders

Contactor 100-240 V for EK43, EK43 S and Guatemala coffee grinders

Spout fastening small parts set for the Guatemala shop grinders

Grind size adjustment cap for the Guatemala 1.0 shop grinder

Ball bearing seat with bearing and pressure ring for the Guatemala shop grinders

Bag clamping lever axle for the Guatemala shop grinder

Recipe information label for recommended grind settings, in english, on the Guatemala 2.0 shop grinder

Bean hopper cover for the Guatemala 2.0 shop grinder

Capacitor with 408µF, 100-127V for the Guatemala 2.0 shop grinder

Felt ring grinding house cover for the Guatemala 2.0 shop grinder

Bag clamping lever axle for the Guatemala shop grinder

Contact element strip for red "Off" push button on Guatemala 1.0, K32 Kenia and EK43 (before April 2018) coffee grinders

Ball bearing for the Guatemala shop grinders

Starting relay with 200-240V, 4CR-2-707 Klixon, for the Kenia K32 and Guatemala 1.0 shop grinders Old article number: 310661

Spout pipe for Kenia K32 and Guatemala shop grinders