E65S Spare Parts

For E65S, E65S GbW, E65W GbS, E65T GbS, K30, K30 2.0, K30 TWIN, K30 TWIN 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders. Also compatible wit...

One single bean hopper seal ring for E65S, E65S GbW, E65W GbS, E65T GbS, PEAK, K30 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders Old articl...

Includes 1 can with 430 g.GRINDZ Grinder Cleaner to remove coffee residues inside the grinder casing and keep grounds fresh at all times. Use for r...

Grinder top cover small parts set for E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

One silicone and metal flapper set for E65S, E65S GbW, E65W GbS and E65T GbS espresso grinders

Complete short bean hopper with 250 gram capacity for E65S, E65S GbW, E65W GbS, E80S, E80S GbW and E80W GbS espresso grinders

Pulling tool to take out the disc carrier, for burrs exchange or other maintenance, on the E65S, E65S GbW, E65W GbS and E65T GbS espresso grinders

Klüberpaste synthetic lubricating grease in a 50 gram tube for use with all coffee grinders. NSF H1 registered

Klüberpaste lubricating and assembly white paste in a 60 gram tube for use with all coffee grinders. NSF H1 registered Old article number: 309336

4 piece set of rubber feet for X54 Allround Home, E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS and E80T GbS coffee grinders

Ten bean hopper seal rings for E65S, E65S GbW, E65W GbS, PEAK, K30 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders Old article number: 309087

Complete bean hopper with 1200 gram capacity for E65S, E65S GbW, E65W GbS, E80S, E80S GbW and E80W GbS espresso grinders

Circuit breaker with 110-127V for the E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS, E80T GbS, K30, K30 2.0 and PEAK espresso grinders

Spout pipe for E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Complete bean hopper with 1800 gram capacity for E65S, E65S GbW, E65W GbS, E80S, E80S GbW and E80W GbS espresso grinders

Drip tray for E65S and E65T GbS espresso grinders

Grinder top cover adapter for E65S, E65S GbW, E65W GbS and E65T GbS espresso grinders. To install, mount the pins with a hammer through the holes, ...

Grind size adjustment transmission set for the E65S and E65S GbW espresso grinders

Single grinder top cover seal ring adapter for E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS, E80T GbS, and K30 espresso grinders

Interlock mechanic set for E65S, E65S GbW, E65W GbS and E65T GbS espresso grinders

Spout angle adjustment guidance for E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Circuit breaker with 100V for the E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS, E80T GbS, K30 and PEAK espresso grinders

Rotary burr carrier for E65S, E65S GbW, E65W GbS and E65T GbS espresso grinders

Display control unit for the E65S espresso grinder

Spout angle adjustment lever for E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Back panel with power board for 110-127V, E65S espresso grinders

Pack of 10 grinder top cover seal ring adapters for E65S, E65S GbW, E65W GbS, E80S, E80S GbW and E80W GbS espresso grinders

Ten piece set of foam non-slip pads for base plates on E65S, E65S GbW, E65W GbS, E80S, E80S GbW and E80W GbS espresso grinders

Interlock switch set for E65S, E65S GbW, E65W GbS, E65T GbS, E80S and E80S GbW espresso grinders

Fixed burr carrier for E65S, E65S GbW, E65W GbS and E65T GbS espresso grinders

Intermediate plate set for E65S, E65S GbW, E65W GbS and E65T GbS espresso grinders

Capacitor with 60µF, 100-127V for E65S, E65S GbW, E65W GbS and E65T GbS espresso grinders

Grinder top cover for E65S and E65S GbW espresso grinders

Spout fixation attachment set for E65S, E65S GbW, E65W GbS and E65T GbS espresso grinders

On-demand start switch portafilter for the E65S espresso grinder

Unlocking lever and sliding pins set for the grind size adjustment ring on the E65S, E65S GbW, E80S and E80S GbW espresso grinders