Spare Parts

Shear plate for Guatemala, Guatemala 2.0 and Kenia shop grinders Old article number: 303864

4 piece set of feet for the K30, Guatemala 2.0 and PEAK (before serial number 602646) coffee grinders

Pressure spring and bushing for the grinding chamber on the Guatemala shop grinder

Spout small parts set for Kenia K32 and Guatemala 1.0 shop grinders

On and off (red and green) button replacement with 100-127 V for Guatemala, Kenia, K32 and EK43 (before April 2018) coffee grinders

Spout seal for Kenia K32 and Guatemala 1.0 shop grinders

Pre-breaker with 71 mm diameter for Guatemala (71mm), Guatemala 2.0 and K32 shop grinders Old article number: 300073

Micro switch for On/Off buttons (stop "0", start "I") for EK43 Allround grinders (after April 2018) and Guatemala 2.0 shop grinders

Spout fastening small parts set for the Guatemala shop grinders

One single bean hopper seal ring for the Guatemala shop grinders, NSF only

Spout small parts set for Kenia K32 and Guatemala 1.0 shop grinders

Set of 2 bag clamping rubber buffers for the Guatemala shop grinders

Spout with bag clamping for the Guatemala and K32 shop grinders

Upper part captive pin for the Guatemala 1.0 and Kenia K32 shop grinders

Ball bearing seat with bearing and pressure ring for the Guatemala shop grinders

Power switch button On/Off for K30 VARIO, K30 2.0, K30 TWIN, K30 TWIN 2.0, Guatemala 2.0 and PEAK coffee grinders

Grind size adjustment knob for the Guatemala 2.0 shop grinder

Grind size adjustment cap for the Guatemala 1.0 shop grinder

Single metal flapper for the Guatemala shop grinder

Contactor 100-240 V for EK43, EK43 S and Guatemala coffee grinders

Bag clamping lever axle and pressure spring for the Guatemala shop grinder

Bag clamping lever axle for the Guatemala shop grinder

Felt ring grinding house cover for the Guatemala 2.0 shop grinder

Capacitor with 408µF, 100-127V for the Guatemala 2.0 shop grinder

Spout pipe for Kenia K32 and Guatemala shop grinders

Ball bearing for the Guatemala shop grinders

Mechanical part for the start button "I" (on) for the EK43 Allround grinders (after April 2018) and Guatemala 2.0 shop grinders

Mechanical part for the stop button "0" (off) for the EK43 Allround grinders (after April 2018) and Guatemala 2.0 shop grinders

Spout seal for the Guatemala 2.0 shop grinder

Grind size adjustment lock for the Guatemala 2.0 shop grinder

Bag clamping pressure spring for the Guatemala 2.0 shop grinder

Contact element strip for red "Off" push button on Guatemala 1.0, K32 Kenia and EK43 (before April 2018) coffee grinders

Starting relay with 200-240V, 4CR-2-707 Klixon, for the Kenia K32 and Guatemala 1.0 shop grinders Old article number: 310661

Bag clamping lever for the Guatemala shop grinder

Plug MATE-N-LOK for the Guatemala 1.0 shop grinder