Spare Parts

One silicone and metal flapper set for E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Grinder top cover small parts set for E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Load cell for E65S GbW, E65W GbS, E80S GbW and E80W GbS espresso grinders

4 piece set of rubber feet for X54 Allround Home, E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS and E80T GbS coffee grinders

Circuit breaker with 110-127V for the E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS, E80T GbS, K30, K30 2.0 and PEAK espresso grinders

Spout pipe for E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Interlock mechanic set for E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Grinder top cover adapter set for E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders. To install, mount the pins with a hammer through the hol...

Single grinder top cover seal ring adapter for E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS, E80T GbS, and K30 espresso grinders

Spout angle adjustment guidance for E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Automatic Grind Size Adjustment (AGSA) for E65W GbS, E65T GbS, E80W GbS and E80T GbS espresso grinders

Spout angle adjustment lever for E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Bean flow inlet adapter for E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Rotary burr carrier for E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Circuit breaker with 100V for the E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS, E80T GbS, K30 and PEAK espresso grinders

Capacitor with 80µF, 100-127V for the E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Fan with 790mm cable length for E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Drip tray for E80S GbW and E80W GbS espresso grinders

Relay for 100-127 V, E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Temperature sensor for E65W GbS, E65T GbS, E80W GbS and E80T GbS espresso grinders

Pack of 10 grinder top cover seal ring adapters for E65S, E65S GbW, E65W GbS, E80S, E80S GbW and E80W GbS espresso grinders

Ten piece set of foam non-slip pads for base plates on E65S, E65S GbW, E65W GbS, E80S, E80S GbW and E80W GbS espresso grinders

Load cell cover for E80S GbW and E80W GbS espresso grinders

Back panel with power board for 100-240V, E80W GbS and E80T GbS espresso grinders

Display control unit for E80W GbS and E80T GbS espresso grinders

Housing side panel set in matte white for E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Portafilter support for E65S GbW, E65W GbS, E80S GbW and E80W GbS espresso grinders

Portafilter holder for E65S GbW, E65W GbS, E80S GbW and E80W GbS espresso grinders

Housing base plate for the E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Spout fixation attachment set for E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Display control housing for the E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Motor mounting gasket for E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Complete set with display hard key, push buttons and springs for E65W GbS, E65T GbS, E80W GbS and E80T GbS espresso grinders

Ten seals for the interlock pin on the E65W GbS, E65T GbS, E80W GbS and E80T GbS espresso grinders

Grind size adjustment transmission for E80W GbS and E80T GbS espresso grinders

Crown emblem small parts set for the housing ring on E65W GbS, E65T GbS, E80W GbS and E80T GbS espresso grinders