All Products

Complete short bean hopper with 250 gram capacity for E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders. ...

For the Tanzania shop grinder. Also compatible with the Ditting 805 shop grinder.Material: hardened special steel Diameter: 80mm Finish: glass bead...

Portafilter holder for E65S, E65T GbS, E80S and E80T GbS espresso grinders

Spout pipe for E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders

Set of 10 silicone flappers (declumpers) for E65W GbS, E65T GbS, E65S GbW, and E65S espresso grinders

Complete bean hopper with 1200 gram capacity for E65S, E65S GbW, E65W GbS, E65T GbS, E80S, E80S GbW E80W GbS and E80T GbS espresso grinders. Compat...

Grind size adjustment cap for the Tanzania shop grinder Old article number: 310267

Single flapper (declumper) piece for K30 2.0, K30 TWIN, K30 TWIN 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders Old article number: 310139 o...

Bean hopper cover set in transparent for Guatemala 1.0 and Kenia K32 shop grinders

Standard spout set for K30 2.0, K30 TWIN, K30 TWIN 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders

Complete body housing small parts set for the K30 TWIN espresso grinder

Drip tray with magnet for the K30 TWIN espresso grinders

Ten bean hopper seal rings for E65S, E65S GbW, E65W GbS, PEAK, K30 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders Old article number: 309087

'Single Shot' button for the K30 espresso grinders, UL

'Double shot' button for the K30 espresso grinders, UL

Small parts base plate set for the K30 espresso grinders

Complete display control unit for the K30 TWIN espresso grinder Old article number: 308332

Rocker switch plate for the K30 TWIN espresso grinder

Complete display control unit for the K30 espresso grinders

Rocker switch button for K30 and PEAK espresso grinders

Micro switch portafilter set for K30, K30 TWIN and PEAK espresso grinders

For E65S, E65S GbW, E65W GbS, E65T GbS, K30, K30 2.0, K30 TWIN, K30 TWIN 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders. Also compatible wit...

Grind size adjustment tool for calibration of K30 and K30 TWIN espresso grinders

For Guatemala and K32 SLG shop grinders. Material: hardened special steel Diameter: 71mm Finish: glass bead blasted for optimal deburring and preve...

Drip tray for PEAK, K30 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders Old article number: 306340

Potentiometer for K30 ES/VARIO and K30 VARIO AIR espresso grinders Old article number: 306319

Pulling tool to take out the disc carrier, for burrs exchange or other maintenance, on EK43, EK43 S, EKK43, VTA 6S and DK15 coffee grinders Old art...

Material: tungsten carbide Diameter: 120mm Finish: Standard Hardness: 75+ HRC (Rockwell) Medium Setting Grind Life: ca. 30-35 tons Optimized geomet...

For the Mahlkönig DK27 Industrial and Ditting 1827 High Volume grinders Material: tungsten carbide Diameter: 180mm Finish: Standard Hardness: 75+ H...

For the Mahlkönig DK27 Industrial and Ditting 1827 High Volume grinders Material: hardened special steel Diameter: 180mm Finish: glass bead blasted...

For the Mahlkönig DK27 Industrial and Ditting 1827 High Volume grinders Material: hardened special steel Diameter: 180mm Finish: glass bead blasted...

These burrs are double sided with a toothed geometry on each side. Once one side is worn, reverse the burrs by rotating them 180°, effectively doub...

For Turkish fine grinding on the EK43, EK43 S and EKK43 Allround grinders. Material: hardened premium cast steel Diameter: 98mm Finish: glass bead ...

For standard grinding in the EK43, EK43 S and EKK43 Allround grinders. Material: hardened premium cast steel Diameter: 98mm Finish: glass bead blas...

For single phase VTA 6S shop grinders Material: hardened special steel Diameter: 120mm Finish: glass bead blasted for optimal deburring and prevent...

For 3-phase VTA 6S shop grinders Material: hardened special steel Diameter: 120mm Finish: glass bead blasted for optimal deburring and prevention o...