EK43 Spare Parts

Shear plate for 100-120V, EK43, EK43 S and EKK43 Allround grinders

The handy, small stainless steel Mahlkönig Dosing Cup allows a precise transfer of the ground coffee from the grinder directly into the portafilter...

Spout contact stripe for EK43, EK43 S and EKK43 Allround grinders Old article number: 701373

Complete bean hopper with 1500 gram capacity for EK43, EK43 S, EKK43, PEAK, K30 2.0, K30 ES/VARIO and K30 VARIO AIR coffee grinders Old article num...

Includes 1 can with 430 g.GRINDZ Grinder Cleaner to remove coffee residues inside the grinder casing and keep grounds fresh at all times. Use for r...

For standard grinding in the EK43, EK43 S and EKK43 Allround grinders. Material: hardened premium cast steel Diameter: 98mm Finish: glass bead blas...

The handy, stainless steel Mahlkönig Dosing Cup with 220ml capacity allows for single dosing of coffee beans into the grinder and transfer of the g...

The EK43, EK43 S, EKK43 alignment tool eliminates any misalignment of the burrs to the motor shaft. The resulting concentricity guarantees for abso...

Single bean hopper seal ring for EK43, EK43 S, EKK43, and K30 TWIN 2.0 coffee grinders

Complete short bean hopper in black with white logo and 250 gram capacity for EK43, EK43 S and EKK43 Allround grinders Old article number: 701553

Klüberpaste synthetic lubricating grease in a 50 gram tube for use with all coffee grinders. NSF H1 registered

Spout fastening small parts set for EK43, EK43 S and EKK43 Allround grinders

Bean hopper with 800 gram capacity for EK43, EK43 S, EKK43, K30 TWIN and K30 TWIN 2.0 coffee grinders Old article number: 309426

Grind size adjustment knob for EK43, EK43 S and EKK43 Allround grinders after serial number 549819

Bag clamping axle and pressure spring set for EK43, EK43 S and EKK43 Allround grinders

Klüberpaste lubricating and assembly white paste in a 60 gram tube for use with all coffee grinders. NSF H1 registered Old article number: 309336

Spout with knocker and bag clamp complete set for EK43, EK43 S and EKK43 Allround grinders

Hopper slider for the 0.8 kg bean hopper on the EK43, EK43 S, EKK43, K30 TWIN and K30 TWIN 2.0 coffee grinders Old article number: 308680

Drip tray for the EK43, EK43 S and EKK43 allround grinders

Pulling tool to take out the disc carrier, for burrs exchange or other maintenance, on EK43, EK43 S, EKK43, VTA 6S and DK15 coffee grinders Old art...

Spout seal for 200-240V, for the EK43, EK43 S and EKK43 Allround grinders

Pressure spring and bushing for the grinding chamber on the EK43, EK43 S, EKK43 and Guatemala 2.0 coffee grinders

Grind size adjustment knob and small parts with larger inner diameter for EK43, EK43 S and EKK43 Allround grinders before serial number 549819

Running capacitor with 50 µF, 100-127 V for EK43, EK43 S, EKK43, K30 VARIO, K30 2.0 and Tanzania coffee grinders

Fixed centrifugal switch for the EK43 Allround grinder Old article number: 305472

Pre-breaker for median grind speed on the EK43, EK43 S and EKK43 Allround grinders

Spout seal for 100-127V, for the EK43, EK43 S and EKK43 Allround grinders

Grind size scale for EK43 and EKK43 Allround grinders

Stainless steel measuring cup with 500 ml capacity for EK43, EK43 S, EKK43 and Guatemala coffee grinders

Set of two aluminum Mahlkönig triangle stickers in red for EK43, EK43 S and EKK43 Allround grinders

For Turkish fine grinding on the EK43, EK43 S and EKK43 Allround grinders. Material: hardened premium cast steel Diameter: 98mm Finish: glass bead ...

One bag clamping rubber buffer for EK43, EK43 S and EKK43 Allround grinders

Starting capacitor with 550 µF, 100-120 V for EK43, EK43 S and EKK43 Allround grinders

On and off (red and green) button replacement with 100-127 V for Guatemala, Kenia, K32 and EK43 (before April 2018) coffee grinders

Felt ring motor shaft for the EK43 Allround grinder

Set of two aluminum Mahlkönig triangle stickers in black for EK43, EK43 S and EKK43 Allround grinders