All Products

Rocker switch plate for the K30 TWIN espresso grinder

Complete display control unit for the K30 espresso grinders

Rocker switch button for K30 and PEAK espresso grinders

Micro switch portafilter set for K30, K30 TWIN and PEAK espresso grinders

For E65S, E65S GbW, E65W GbS, E65T GbS, K30, K30 2.0, K30 TWIN, K30 TWIN 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders. Also compatible wit...

Grind size adjustment tool for calibration of K30 and K30 TWIN espresso grinders

For Guatemala and K32 SLG shop grinders. Material: hardened special steel Diameter: 71mm Finish: glass bead blasted for optimal deburring and preve...

Drip tray for PEAK, K30 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders Old article number: 306340

Potentiometer for K30 ES/VARIO and K30 VARIO AIR espresso grinders Old article number: 306319

Pulling tool to take out the disc carrier, for burrs exchange or other maintenance, on EK43, EK43 S, EKK43, VTA 6S and DK15 coffee grinders Old art...

Material: tungsten carbide Diameter: 120mm Finish: Standard Hardness: 75+ HRC (Rockwell) Medium Setting Grind Life: ca. 30-35 tons Optimized geomet...

For the Mahlkönig DK27 Industrial grinder Material: tungsten carbide Diameter: 180mm Finish: Standard Hardness: 75+ HRC (Rockwell) Lifetime on medi...

For the Mahlkönig DK27 Industrial grinder Material: hardened special steel Diameter: 180mm Finish: glass bead blasted for optimal deburring and pre...

For the Mahlkönig DK27 Industrial grinder Material: hardened special steel Diameter: 180mm Finish: glass bead blasted for optimal deburring and pre...

These burrs are double sided with a toothed geometry on each side. Once one side is worn, reverse the burrs by rotating them 180°, effectively doub...

For Turkish fine grinding on the EK43, EK43 S and EKK43 Allround grinders. Material: hardened premium cast steel Diameter: 98mm Finish: glass bead ...

For standard grinding in the EK43, EK43 S and EKK43 Allround grinders. Material: hardened premium cast steel Diameter: 98mm Finish: glass bead blas...

For single phase VTA 6S shop grinders Material: hardened special steel Diameter: 120mm Finish: glass bead blasted for optimal deburring and prevent...

For 3-phase VTA 6S shop grinders Material: hardened special steel Diameter: 120mm Finish: glass bead blasted for optimal deburring and prevention o...

For Kenia, K22 and K32 shop grinders. Material: hardened special steel Diameter: 65mm Finish: glass bead blasted for optimal deburring and preventi...

Shear plate for Guatemala, Guatemala 2.0 and Kenia shop grinders Old article number: 303864

Shaker tappet mechanism with small parts for VTA 6S and VTA 6S W shop grinders

Shaker plate with small parts for VTA 6S and VTA 6S W shop grinders

Pre-breaker with 71 mm diameter for Guatemala (71mm), Guatemala 2.0 and K32 shop grinders Old article number: 300073

Spout pipe grinding house for K30 2.0, K30 TWIN and K30 TWIN 2.0 espresso grinders Old article number: 243557

The EK43, EK43 S, EKK43 alignment tool eliminates any misalignment of the burrs to the motor shaft. The resulting concentricity guarantees for abso...

Pre-breaker with 17mm diameter for DK15 industrial coffee grinders after serial number 320289 Old article number: 300044 or 105347

Complete power board with 100-240 V, 50/60 Hz for the PEAK espresso grinder

Complete processor board for the K30 and PEAK espresso grinders

For the PEAK, E80S, E80S GbW, E80W GbS and E80T GbS espresso grinders. Also compatible with Ditting 804 Lab Sweet, Ditting 807 Lab Sweet and Dittin...

Assembled fan with cable for the K30 espresso grinders Old article number: 701257 or 102115

Commercial retail coffee grinder designed for cafés, roasteries, and coffee labs that need fast, consistent grinding for brew bar service and bagge...

The E80S sets the new benchmark in premium espresso grinding. It provides top-notch grinding speed and effortlessly copes with high daily capacitie...