E80S GbW Spare Parts

One silicone and metal flapper set for E80S and E80S GbW espresso grinders

Grinder top cover small parts set for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Includes 1 can with 430 g.GRINDZ Grinder Cleaner to remove coffee residues inside the grinder casing and keep grounds fresh at all times. Use for r...

Complete short bean hopper with 250 gram capacity for E65S, E65S GbW, E80S and E80S GbW espresso grinders

For the E80S and E80S GbW espresso grinders. Material: hardened special steel Diameter: 80mm Finish: glass bead blasted for optimal deburring and p...

Pulling tool to take out the disc carrier, for burrs exchange or other maintenance, on the E80S and E80S GbW espresso grinders

Single flapper piece for the E80S and E80S GbW espresso grinders

Klüberpaste synthetic lubricating grease in a 50 gram tube for use with all coffee grinders. NSF H1 registered

For the PEAK, E80S and E80S GbW espresso grinders. Also compatible with Ditting 804 Lab Sweet, Ditting 807 Lab Sweet and Ditting PEAK espresso grin...

Load cell for E65S GbW and E80S GbW espresso grinders

Klüberpaste lubricating and assembly white paste in a 60 gram tube for use with all coffee grinders. NSF H1 registered Old article number: 309336

4 piece set of rubber feet for X54 Allround Home, E65S, E65S GbW, E80S and E80S GbW coffee grinders

Circuit breaker with 110-127V for the E65S, E65S GbW, E80S, E80S GbW, K30, K30 2.0 and PEAK espresso grinders

Spout pipe for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Complete bean hopper with 1800 gram capacity for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Interlock mechanic set for E80S and E80S GbW espresso grinders

Complete bean hopper with 1200 gram capacity for E65S, E65S GbW, E80S and E80S GbW espresso grinders Old article number: 700610

Grinder top cover adapter set for E80S and E80S GbW espresso grinders. To install, mount the pins with a hammer through the holes, the notched end ...

Spout angle adjustment guidance for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Grind size transmission for the E80S and E80S GbW espresso grinders

Power board unit with 100-127 V for E65S GbW and E80S GbW espresso grinders

Single grinder top cover seal ring adapter for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Drip tray for the E80S GbW espresso grinder

Display control unit for the E80S GbW espresso grinder

Pack of 10 grinder top cover seal ring adapters for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Unlocking lever and sliding pins set for the grind size adjustment ring on the E65S, E65S GbW, E80S and E80S GbW espresso grinders

Load cell cover for the E80S GbW espresso grinder

Grinder top cover for E80S and E80S GbW espresso grinders

Fan with 790mm cable length for E80S and E80S GbW espresso grinders

Relay for 100-127 V, E80S and E80S GbW espresso grinders

Interlock switch complete set for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Housing side panel set in matte white for the E80S and E80S GbW espresso grinders

Complete set with display hard key, push buttons and springs for E65S GbW, E80S and E80S GbW espresso grinders Old article number: 701046

Rotary burr carrier for the E80S and E80S GbW espresso grinders

Spout angle adjustment lever for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Spout fixation attachment set for E80S and E80S GbW espresso grinders